Not affiliated with PSA, BGS, CGC, Nintendo, or The Pokemon Company. Independent collector tool.
Home › Guides › Holofoil Print Lines

Holofoil Print Lines: The Hidden PSA 10 Killer

You've found a perfectly centered holo card with sharp corners and clean edges. Then you tilt it under a light and see them — thin lines running across the holofoil. Print lines are the most overlooked defect in card grading, and they've crushed more PSA 10 hopes than almost anything else.

Updated November 2026 · 11 min read
In This Guide
  1. What Are Print Lines?
  2. How to Detect Print Lines
  3. Severity Levels and Grade Impact
  4. Which Sets Are Most Affected
  5. Print Lines vs. Scratches: How to Tell
  6. How Grading Companies Handle Print Lines
  7. Can Print Lines Be Fixed?
  8. Frequently Asked Questions

What Are Print Lines?

Print lines are thin, straight lines that appear on the holographic foil surface of trading cards. They're caused by the manufacturing process — specifically the application of the holographic foil layer onto the card stock, or imperfections in the printing rollers.

Key characteristics of print lines:

  • They run in a consistent direction (usually horizontal or at a slight angle)
  • They're present from the moment the card is manufactured — this is a factory defect
  • They're most visible under bright, angled light — they may be invisible in normal viewing
  • They cannot be removed, polished away, or fixed by any means
  • They only affect the holographic area of the card — non-holo cards don't have them

Print lines are not your fault. They're not caused by handling, storage, or anything you did. But they absolutely affect your grade, because grading companies evaluate the card's condition as it currently exists, regardless of whether a defect is factory-original or collector-caused.

How to Detect Print Lines

Print lines are sneaky. In normal lighting, a card can look flawless. Here's how to find them:

Step 1: Use a Bright, Direct Light Source

A desk lamp, flashlight, or phone flashlight works. You need a strong, focused light source — overhead room lighting usually isn't enough to reveal subtle print lines.

Step 2: Angle the Card

Hold the card at various angles under the light. Tilt it slowly back and forth, watching the holo surface. Print lines become visible when light catches them at specific angles — they appear as thin lines that reflect light differently than the surrounding holo pattern.

Step 3: Check the Entire Holo Area

Print lines can be localized (appearing only in part of the holo area) or running across the entire card. Scan the full holo surface systematically.

Step 4: Use Magnification

A jeweler's loupe (10x) or macro photography can reveal print lines that are invisible to the naked eye. Graders use magnification, so what you see at 10x is closer to what they'll evaluate.

Take photos under angled light. Upload those photos to CardGradeCheck for surface analysis. The AI can detect surface imperfections that might be difficult to assess visually, including subtle print lines.

Severity Levels and Grade Impact

Not all print lines are equal. Their impact on your grade depends on how visible and numerous they are:

Severity Description Likely Grade Impact
Faint Only visible at one specific angle under bright direct light. One or two thin lines. May still pass PSA 10 (grader dependent)
Moderate Visible at multiple angles under direct light. Several lines across the holo. Likely PSA 9, possibly PSA 8
Heavy Visible in normal room lighting. Prominent lines across the holo surface. PSA 8 or lower on surface sub-category

The frustrating reality is that there's a gray area, particularly between "faint" and "moderate." Grading involves human judgment, and different graders may assess borderline print lines differently. This is one area where grading results can feel inconsistent.

Which Sets Are Most Affected

Print line prevalence varies significantly across sets and eras:

High Print Line Risk

  • Base Set (1st Ed and Unlimited) — The galaxy/cosmos holo foil used in the original Base Set is notorious for print lines. Almost every Base Set holo has them to some degree.
  • Jungle — Same foil technology, similar print line issues.
  • Fossil — Completes the trio of early sets with consistent print line problems.
  • Base Set 2 — Reprints using the same foil process.

Moderate Print Line Risk

  • Team Rocket through Neo sets — Improved but not eliminated. Print lines still common on holos.
  • E-Card series (Expedition through Skyridge) — The e-Card holo pattern is different and somewhat less prone to visible print lines.

Lower Print Line Risk

  • Modern sets (2020+) — Significantly improved print quality. Print lines still occur but are less common and generally less severe. Full art and VMAX/VSTAR cards use different foil processes that have their own surface issues but fewer classic print lines.

If you're grading vintage WOTC holos, inspect every single card for print lines. It's not a question of if they have print lines — it's a question of how bad they are.

Print Lines vs. Scratches: How to Tell

Print lines and scratches can look similar at first glance, but they're fundamentally different defects with different implications:

Feature Print Lines Scratches
Direction Run in a consistent direction (usually parallel) Random directions, often curved or irregular
Location Only on the holographic area Can appear anywhere on the card surface
Depth Part of the foil layer — cannot be felt Physical marks — may be felt with a fingernail
Origin Factory manufacturing process Handling, storage, or play wear
Consistency Evenly spaced, uniform width Irregular spacing and width

Both affect your grade, but understanding the difference helps you evaluate cards accurately. A card with light print lines but no scratches was well-cared-for and has a factory limitation. A card with scratches has handling damage that might indicate other issues too.

How Grading Companies Handle Print Lines

Print lines fall under the "surface" sub-category in grading. Here's how each major company approaches them:

  • PSA — Print lines are factored into the surface evaluation. Faint print lines may still receive a PSA 10, but moderate or heavy print lines typically cap the grade at PSA 9 or lower. PSA doesn't use sub-grades, so you won't know specifically that print lines caused a lower grade.
  • BGS — Surface is one of four sub-grades. Print lines directly impact the surface score. A card with noticeable print lines might receive a surface sub-grade of 9 or 8.5, which drags down the overall grade.
  • CGC — Similar to BGS, print lines affect the surface sub-grade. CGC's optional sub-grades make it clear when surface is the limiting factor.
Grading is not perfectly consistent on print lines. Because severity assessment involves judgment, some collectors report different outcomes when submitting the same card multiple times. This doesn't mean the system is broken — it means borderline cases genuinely fall in a gray area.

Can Print Lines Be Fixed?

No. Print lines are part of the holographic foil layer itself. They cannot be:

  • Polished or buffed out
  • Filled in with any product
  • Reduced through any treatment

Any attempt to "fix" print lines will almost certainly cause additional damage to the card's surface, making the grade worse. Products marketed as "card polish" or "surface restorers" are snake oil at best and damaging at worst. Professional graders can detect attempted surface treatments and will downgrade or reject cards that have been tampered with.

The only strategy for dealing with print lines is to inspect before you buy or submit. Check every holo card for print lines under proper lighting before making purchasing or grading decisions.

Analyze Your Card's Surface Before Submitting
Upload a photo for AI-powered surface analysis including print line detection. Know what the grader will see before you pay.
Check your card's grade free → cardgradecheck.com

Frequently Asked Questions

What are print lines on Pokemon cards?
Print lines are thin lines that run across the holographic foil surface of a card. They are caused by the printing or foil application process during manufacturing. Print lines are factory defects — they exist from the moment the card is made and cannot be removed. They are most visible when the card is held under bright, angled light.
Do print lines prevent a PSA 10?
It depends on severity. Very faint print lines that are only visible under specific lighting conditions may not prevent a PSA 10, as graders exercise some judgment on the significance of surface imperfections. Prominent print lines that are easily visible will likely cap your grade at PSA 9 or lower. There is no official PSA policy stating how many or how severe print lines must be to affect the grade.
Which Pokemon sets have the most print lines?
Vintage WOTC sets — particularly Base Set, Jungle, and Fossil — are notorious for print lines on holo cards. The galaxy/cosmos foil pattern used in these sets was especially prone to visible print lines. Modern sets have fewer print line issues but they still occur, particularly on full art and textured cards.